Hydraulic Valve History

Hydraulic Valve History Began: Hydraulic technology rose from the hydrostatic transmission theory by French B. Pascal in , after more than 200 years, British Joseph Bramah registered the world&#;s first hydraulic machine patent in . During these period, in, D. Papain invented an autoclave with a relief valve pressure. In Mid- 19th century British engineer William George Armstrong invented a hydraulic accumulators and the British engineer F. Jinken invented the world first flow control valve with differential pressure compensated function.

Huade Hydraulic contains other products and information you need, so please check it out.

However, the sealing problem has not been able to find a very good solution due to water as the media, as well as a lower precision manufactured hydraulic components and process manufacturing, the hydraulic technology has been slow to develop, almost to a standstill at that time.

In , Americans Mr. Janney first proposed to use mineral oil instead of water as hydraulic media started new hydraulic technology. Since advanced manufacturing process and the raise the level of vehicle, aviation, ships, and other power transmission has emerged and produced axial piston pumps, radial and axial hydraulic motor, hydraulic components, and was the first time to apply to machines.

During the Second World War, due to the military purpose, began to produce electro-hydraulic servo system for the fast response and high accuracy of the hydraulic components and control system, so that the hydraulic technology has been rapid development.

Hanry Vickers, in , invented pilot operated pressure valves as threaded connection series hydraulic control components. The research for hydraulic valves has made great progress in complex copying tool of Germany and electro-hydraulic servo valve of U.S.A.

After the war, with the improvement of technology level, hydraulic technology has developed rapidly, it is extended to all areas of civilian industries and national economy, in machinery manufacturing, crane and vehicle loading machines and all kinds of construction machinery, shipbuilding, aviation and other fields, the hydraulic products have been widely developed and applied. Especially since the &#;s, with the development of atomic energy, aerospace technology, microelectronic technology, hydraulic technology has been developed in a deeper wider industrial area.

After the end of the &#;s, China gradually established a hydraulic components factory, introduction of the Japanese oil research company in middle and 21 MPa high pressure series hydraulic valve, developed a nozzle block series electro-hydraulic servo valve. Development and design of 2.5MPa and 6.3 low and middle-pressure hydraulic valve, designed the first set of 31.5MPa high pressure hydraulic valve, to complete the design and prototype of a new series of 32MPa high pressure valve drawings. Successfully manufactured electro-hydraulic proportional pressure relief valve, electro-hydraulic proportional flow valve. Began to produce hydraulic modular valve, hydraulic cartridge valve and hydraulic system. Thereby forming an independent hydraulic components manufacturing industry system. Throughout the &#;s, was a period of development varieties hydraulic valves in China.

In the s, China has introduced more than 40 advanced hydraulic technology, successfully development of electro-hydraulic proportional valve, electro-hydraulic digital valve and GE series middle and high pressure valve, at the same period, there are modular hydraulic valve series and low-power consumption hydraulic solenoid valve, as well as new theory electro-hydraulic proportional valve, electro-hydraulic integrated block.

As a result of a half century of development, China&#;s hydraulic industry has extended to hundreds of different types of hydraulic component factory (Company), to form a complete classify hydraulic valve industry, with a high production capacity and advanced level of hydraulic technology.

The close combination of hydraulic technology and modern mathematics, mechanics and micro-electronics technology, computer technology, hydraulic control science lead to the microprocessors, electronic amplifiers, sense measuring element and hydraulic control unit of mechanical and electrical integration products.

With the progress of science and technology, environmental protection, energy crisis awareness-raising in the past 20 years, a new awareness and water or hydraulic technology and in theory and applied research, it is the sustained and steady recovery and development, and has become hot topic and new direction of development in a modern hydraulic technology.

Current and future periods, a variety of hydraulic equipment including hydraulic valves will be relying on new developed machinery manufacturing, materials engineering, micro-electronics and computer, mathematics and mechanics, control of scientific and related areas of advanced technology, to the way of energy conservation, intelligence, electronic, high-pressure , miniaturization , integration, complex , personalized , long life, high reliability, green ( low pollution, low noise, low vibration, no leak ) direction way in response to the new century, new competition and new challenges. The hydraulic valve is designed to meet and apply to all kinds of products related to energy-saving, environmentally friendly, efficient, automated, secure and reliable requirements.

In this section, you will learn about the various sub-categories of valves. This will give you an in-depth knowledge on what has been mentioned previously in chapters 3 and 4.

So, chapter 5 will focus mainly on the sub-categories of:

• Pressure control hydraulic valves
• Flow control hydraulic valves
• Directional control hydraulic valves

The main areas of focus will be the key applications and features of each sub-category. Moreover, it will also include either a video or image of every hydraulic valve.

With this, you&#;ll be able to choose the right valve for a specific application. The section will cover over 20 different types of hydraulic valves.

Now, let&#;s start with the:

5.1 Pressure Control Hydraulic Valve

As you can see, these are broad functions. With this information alone, it is nearly impossible to choose the right pressure control valve for a hydraulic system.

For sure, this can be a nightmare if you&#;re new to hydraulic systems. Therefore, in this section, you will learn about these 7 different types of pressure control valves:

• 5.1.1 Hydraulic relief valve
• 5.1.2 Pilot operated hydraulic relief valve
• 5.1.3 Spool type hydraulic relief valve
• 5.1.4 Hydraulic pressure reducing valve
• 5.1.5 Hydraulic sequence valve
• 5.1.6 Hydraulic load control valve
• 5.1.7 Hydraulic counterbalance valve

Remember, these are pressure control valves. They come in unique designs suitable for specific applications.

Let&#;s review each of these pressure control valves:

5.1.1 Hydraulic Relief Valve

Hydraulic relief valves play an integral role in hydraulic systems. They are the most commonly used pressure control valves.

In hydraulic systems, you can use these valves mainly for two major roles:

• Protect hydraulic circuits from overload
• Limit force or toque from rotary motors or linear actuators

These functions may vary depending on the design of a hydraulic system. However, this does not imply that the relief valves will have a completely unique design.

The internal design of all these valves is basically the same. Broadly, hydraulic valves have two sections.

These include a piston that is normally retained by springs and a pilot-valve or cover that controls the piston&#;s movement.

Normally, you can adjust the control range using screws.

This is an image of hydraulic relief valve. Image source: Hydraulic Valve.

To ensure that these relief valves remain effective in hydraulic systems, it is advisable to adopt an appropriate cleaning process. That is, you should reduce the operating pressure since this will help flush out any possible sludge deposits.

This implies that, operating hydraulic relief valves at reduced pressure removes sludge deposits.

In most cases, the complexity of relief valves in a hydraulic circuit will depend on the specific functions you intend to achieve. Still, the working principle will still remain the same.

Here is what you should expect:

You can connect a relief valve in a hydraulic system such that one port is in line with pressure line while the other port is connected to a reservoir. The ball will remain in position and this will be due to a force exerted on it by the spring.

You can change this by adjusting the hydraulic relief valve&#;s screw.

As the hydraulic system operates, the hydraulic relief valve will remain closed as long as the pressure remains below the minimum threshold to overcome the force exerted by the spring.

Whenever the pressure at the inlet exceeds the force exerted by the spring, the ball moves from its position. This opens the valve and the hydraulic fluid flows through the pressure line to the reservoir.

Normally, this diversion prevents increase in pressure in the hydraulic system. As the pressure at the inlets reset back to the initial value, the valve will close again.

You should note these key aspects here:

1. Cracking pressure: This is the pressure at which the hydraulic relief valve begins to function.
2. Full-flow pressure: It is the pressure at which the valve allows maximum fluid to pass through.

In short, before you choose this valve, it is important to understand the hydraulic fluid circuit structure and its function.

5.1.2 Pilot Operated Hydraulic Relief Valve

Under normal circumstances, you may have to choose between a direct acting valve and pilot-operated valves. But, what brings the difference?

A pilot operated valve mainly regulates the pressure. On the other hand, a direct-acting valve will prevent over pressure.

The way these two valves operate, may depend on their design. For now, let&#;s focus on pilot operated hydraulic valves.

Below is a video showing how a pilot operated relief valve works:

https://youtu.be/q5NV2gBsryk

The pilot operated hydraulic valve designs are such that they may regulate pressure based on two distinct factors:

• Use internal pressure setting to control pressure
• Depend on a remote circuit to regulate pressure

In most cases, they are a perfect choice in situations where multiple settings are required to control hydraulic fluid.

Normally, you can use a pilot operated hydraulic relief valve to unload the pump at low pressure. This practice is common in periods between work cycles.

5.1.3 Spool Type Hydraulic Relief Valve

These hydraulic relief valves have a spool located in their housing. Normally, there must be an actuation force to control the spool.

Spool type hydraulic relief valves have unique features such as:

• High switching power
• Low actuating force
• Robust control function

The working principle here is not different from that of the directional spool valves. Below is an example of spool type hydraulic relief valve:

This an example of a water hydraulic relief valve with a spool. Image source: The American Society of Mechanical Engineers.

In most cases, the spool type valves unload flow after the hydraulic system reaches a required pressure setting. The design of the spool type hydraulic valves guarantees a fast responding and reliable performance.

Whenever you are using a spool type hydraulic valve, it is important to take care of any possible leakages. You will find that operating a spool type hydraulic relief valve at high pressure may result in leakage losses.

The leakages are common around the spool. They depend on the following key aspects:

• Gap between the spool and the hydraulic relief valve housing
• Hydraulic system pressure
• Viscosity of the hydraulic fluid

In short, a good understanding of a hydraulic system will help you to choose the right spool type hydraulic relief valve.

5.1.4 Hydraulic Pressure Reducing Valve

A hydraulic pressure reducing valve is yet another important accessory in hydraulic systems. It makes redesigning the existing hydraulic systems cost competitive.

In hydraulic circuits, these valves limit pressure in brand circuits. At times, the average pressure in the main hydraulic system can be 750 psi, and the maximum pressure requirement in one of the branch-circuits is 250 psi.

This is a hydraulic pressure reducing valve. Image source: Valve Hydraulic.

In such situations, you will need a hydraulic pressure reducing valve in the system and it must be set to 250 psi. Like in other hydraulic valves discussed earlier, the valve will remain open as long as the pressure is not sufficient to overcome the force of the spring.

Otherwise, the valve will close partially or fully, depending on the amount of pressure.

5.1.5 Hydraulic Sequence Valve

These valves play an integral role in a sequence of operations in hydraulic circuits. That is, one action cannot take place before the other.

Definitely, all these actions must be related. Take for example, the landing gears of an aircraft.

The process is such that, the landing gear only begins to extend after the landing gear doors are fully open. Furthermore, the door only closes after the landing gears have fully retracted.

Here is a video illustrating how hydraulic sequence valves work in fork lifts:

https://www.youtube.com/watch?v=Hn8GKKVM-DQ

So, what makes hydraulic sequencing valves different from the other types of hydraulic relief valves?

Ideally, the working principle of sequence valves is similar to that of the relief valves. However, in the case of hydraulic sequence valves, after reaching the set pressure, it diverts the fluid to the next actuator to perform other tasks within the system.

You can learn more about hydraulic sequencing circuits by watching this video:

https://www.youtube.com/watch?v=nyrDHoAVihs

The sequence valves come in a wide range of shapes and designs. For instance, when it comes to hydraulic systems, you can choose either a mechanical or pressure control sequence valve.

It is important that you understand the order in which every operation should take place.

5.1.6 Hydraulic Load Control Valve

The load control valves play an integral role in the hydraulic systems. They come in a wide range of shapes and designs.

Hydraulic load control valves are mainly designed to prevent the load from running ahead of the hydraulic pump. That is, hydraulic load control valves provide a positive load holding.

Basically, they are special types of hydraulic pressure valves that prevent loads on either motors or cylinders from dropping in an uncontrollable manner.

They are common in both positioning, and moving systems. Some of the most common designs may include screw-in cartridge or inline housing valves.

This is a hydraulic load control system. Image source: Hydraulics and Pneumatics.

Depending on the intended application, you may go for the following types of hydraulic load control valves:

• Pilot vented or assisted load control valves
• Manifold mounted motor control valves
• Counter balance valves
• Load control valve cartridge

In short, there are many series depending on the specific hydraulic system requirements. At times, hydraulic valve manufacturers may decide to combine different functionalities into one valve.

That is, you may find a valve with three different functions such as: Pipe-rapture safety protection, safety valve and load control.

So, before you purchase a hydraulic load control valves, know all possible functionalities and specifications.

5.1.7 Hydraulic Counterbalance Valve

In hydraulic systems, you&#;ll find counter balance valves in applications that work with either suspended or overriding loads. The hydraulic counterbalance valves create a back pressure to prevent any possibility of losing control over the load.

They are designed such that they allow free flow in one direction and prevent flow of hydraulic fluid in another direction until a certain system pressure is reached.

These are two different designs of counterbalance valve.

The hydraulic counterbalance valves are also called the load holding valves. They are designed such that they can control the motion of the load in the following ways:

• In case of tube or hose failure, they prevent load from dropping
• Prevent the load from drift whenever there is a leakage in the spool of directional control valves.

The hydraulic counterbalance circuits come in a wide range of designs. This depends on the complexity of the hydraulic circuit and the specific tasks it should handle.

At this juncture, I am sure you can clearly distinguish the various pressure control valves available. As you may have realized, some of these valves may perform the same function in hydraulic system when modified accordingly.

Apart from these, another set of valves that play an important role in hydraulic systems are the flow control hydraulic valves. You will learn more about them in the next section of this hydraulic valve eBook.

5.2 Flow Control Hydraulic Valve

The flow control hydraulic valves regulate flow rate of hydraulic systems. As a result, you can perform the following key functions easily:

• Control the speed of an actuator
• Regulate rate of energy transfer in the hydraulic system

Ideally, a hydraulic flow control valve acts as a &#;fluid switch&#;.

These flow control hydraulic valves come in a wide range of designs and shapes, for various applications.

Some of the key applications may include material processing, conveyor systems, manufacturing, transport industries, etc.

Normally, a high quality flow control hydraulic valve is regarded as one that guarantee consistent flow irrespective of the load. That is, they can effectively limit the amount of fluid flow in hydraulic circuits.

Furthermore, a high quality flow control valve should reduce the effect temperature. This will also depend on the nature of the hydraulic valve design.

Furthermore, a high quality flow control valve should reduce the effect temperature. This will also depend on the nature of the hydraulic valve design.

By the end of this section, you should be able to choose an appropriate flow control valve for your application.

So, let&#;s start with:

If you want to learn more, please visit our website Hydraulic pressure valve.

5.2.1 Hydraulic Needle Valve

Hydraulic needle valves are valves with a needle-shaped plunger or long tapered point on one end of their stem. These are unique valves that are common in hydraulic systems with relatively low flow rates.

Due to their unique design and how they control fluid flow, you can use them as throttle valves. Ideally, these valves are suitable when controlling fluid flow in delicate components in a hydraulic system.

Below, is a video showing how hydraulic needle valves work:

https://www.youtube.com/watch?v=CzBB1CEAAS4

As you can see in the video, a tapered pin gradually opens and closes the conduit. This allows for fine and smooth flow of the hydraulic fluid.

Clearly, by turning the screw, you can comfortably regulate the fluid flow using a hydraulic needle valve.

But, where exactly can you use a hydraulic needle valve?

Needle valves are suitable for the following key applications:

• Control flow into delicate gauges; such components that may get damaged by a sudden surge in fluid pressure.
• Ending working cycle; a hydraulic system can slowly be stopped by adjusting the needle valve
• Common in metering applications
• Bleed valves in heating applications

Although a number of hydraulic valve manufacturers are trying to adopt other mechanisms of opening and closing these valves, most of them are manually operated.

Apart from the hydraulic needle valve, another essential valve is the:

5.2.2 Hydraulic Flow Divider

A hydraulic flow divider is a key component of a flow divider cartridge. They are available in different designs and configurations.

Depending on the nature of the application, you may use this hydraulic valve as a hydraulic flow divider or hydraulic combiner. Generally, you can represent hydraulic valve divider as:

This is a simple circuit of hydraulic divider valve circuit. Image source: Hydraulic & Pneumatics

Depending on the nature of the flow control requirements, you may opt for divider valves with varying pressures and flow rates. Furthermore, the complexity and dynamisms in the hydraulic circuits have led to the design of more efficient valves.

Examples of hydraulic applications where these valves play a critical role include: Flow partitioning, cylinder synchronization, transmission differentials and motor synchronization. Normally, advanced hydraulic flow divider valves have interlocking spools that help in pressure compensation.

Such hydraulic flow divider valves have a complex circuit diagram. Here is a good example:

Spool-type hydraulic flow divider valves

As you can see from the images above, the hydraulic fluid that passes through the valves splits into two. Moreover, from the circuit diagram above, you can easily tell the direction of hydraulic fluid flow.

In most cases, a spool type hydraulic flow divider valve does not allow for reverse flow. It is for this reason that spool type hydraulic divider valves used to synchronize cylinders features a check valve.

The check valves pass the reverse flow.

Apart from the hydraulic flow divider/combiner valve, another essential valve is the pressure compensated flow control valve.

5.2.3 Pressure Compensated Flow Control Valve

Are you operating a hydraulic system that requires constant flow with varying pressures and loads? Well, the modern pressure compensated flow control valves feature unmatched features such as:

• Almost no change flow with pressure variation
• Durable with reverse pressure function
• Tamperproof options

This makes pressure compensated flow control valves suitable for hydraulic power packs/units, accumulator bleed-off and motor/cylinder speed control.

Below is a diagram showing a pressure compensated flow control valve:

This is an image of pressure compensated flow control valves. Image source: Valve Hydraulic

So far, you&#;ve learned about flow control valves; but what makes pressure compensation an important aspect here?

The pressure compensated flow control valves feature a setting that allows for safe variations in pressure in the hydraulic system. This hydraulic valve eliminates undesired change in actuator speed with any change in load.

In short, the pressure compensated flow control valves are suitable in applications where hydraulic actuators should maintain a constant speed irrespective of any change in load or pressure.

5.3 Directional Control Hydraulic Valve

Directional control hydraulic valves are versatile components of hydraulic systems. They are uniquely designed to: Change direction, stop and allow hydraulic fluid flow.

Depending on the type of hydraulic circuits, they are available in simple designs such as the 2-way valve to those with complex structure such as the 4-way control valves in the double-acting actuators.

A directional hydraulic control valve

The directional hydraulic valves may have sophisticated control mechanisms that enhance performance and functionality. These may include either manually or solenoid controlled directional control valves.

Ideally, with the advancement in technology, you can adapt directional control valves to nearly any application. For instance, you may opt for poppet type, sliding spool or screw-in cartridge valves; just to mention a few.

The unique designs of these valves aim to reduce leakage in the hydraulic system while preventing load drop.

Below are different types of directional hydraulic valves you need to know:

5.3.1 Hydraulic Solenoid On/Off Valve

Hydraulic solenoid On/Off valve is an electromechanically controlled valve. They are controlled by an electric current that passes through the solenoid.

Solenoid valves are used in many applications such as hydraulic manifolds to achieve the desired performance.

These are a series of solenoid valves. Image source: Wikipedia

In certain hydraulic fluid applications, you may use a solenoid operated On/Off hydraulic valves. However, you need to deal with certain problems such as hysteresis and saturation.

The hydraulic solenoid On/Off valves are available in a wide range of shapes and designs where the solenoid may be activated by a pressure switch, electrical On/Off device or level probe.

For solenoid pilot valves, there is an option for manual operation.

5.3.2 Hydraulic Spool Valve

As you have learnt in the previous sections, there are many types of hydraulic valves. They come in a wide range of shapes and designs.

A good example is a hydraulic spool valve. In these valves, the position of the spool determines the direction where the oil will flow.

Some examples of hydraulic spool valves include:

• ON/OFF directional spool valves
• Proportional spool valve
• Valve combinations

The directional spool valves, are popular for low actuating force, a range of control functions and high switching power. Normally, the spool within the valve housing either connects or separates depending on the available actuating force.

This is an example of a directional spool valve. Image source: Valve University

For the scope of this section, we&#;ll discuss the following three types of spool valves:

• 3W2P hydraulic spool valve
• 4W2P hydraulic spool valve
• 4W3P hydraulic spool valve

So, let&#;s start with:

5.3.2.1 3W2P Hydraulic Spool Valves

A 3 way spool type solenoid valve is common in most hydraulic applications. Normally, you&#;ll find valves with a wide range of flow rates and pressures.

All these depend on specific designs of the 3 way valve. Can you remember how a 3 way 2 position directional control valve works?

I had discussed this earlier in this hydraulic valve eBook.

This is a complete diagram showing the working principle of 3W2P hydraulic valve. Image source: MathWorks

The only difference here is the hydraulic valve spool. You&#;ll learn more about the hydraulic valve parts in chapter 6 of this hydraulic valve eBook.

Under normal circumstances, the 3W 2P hydraulic spool valve designs ensure predictable and reliable performance even in minimal hysteresis or low pressure drop. This makes these 3 way 2 position valves a perfect choice for unloading or switching applications that do not require low poppet leakage.

Closely related to this is the:

5.3.2.1 4W2P Hydraulic Spool Valves

A 4 way 2 position hydraulic spool valve equipped with a solenoid offers a perfect and effective fluid flow control mechanism. They are suitable for both either actuation or reversing applications.

Depending on their structural design, you can use these valves for a range of flow rates and pressures.

This is a schematic drawing of a 4 way 2 position hydraulic valve.

The working principle of the 4W2P hydraulic spool valve is quite similar to those I had discussed earlier in this eBook.

5.3.2.2 4W3P Hydraulic Spool Valves

In case you have forgotten how a 4 way 3 position hydraulic valve works, here is a practical video of the same:

https://youtu.be/XiC6PXtDnTU

The 4W3P hydraulic spool valves are common in a number of complex hydraulic systems such as reverse flow control, actuator applications, pilot circuits and bi-directional motors, just to mention a few.

The working principle and specification is not different from the two hydraulic spool valves I have discussed above.

Now, at this juncture, all that remains is your ability to understand the basic parts of hydraulic valves and their respective functions. You will learn about this in chapter 5.

But before that, let&#;s have a quick overview of another critical component of the hydraulic circuit; the hydraulic check valve.

5.3.3 Hydraulic Check Valve

Hydraulic check valve is a simple and essential type of directional control valve. The design of these check valves is such that they allow hydraulic fluid to flow in one direction and stop flow in the opposite direction.

At times, they are also referred to as non-return valves. In most hydraulic fluid systems, they:

• Protect hydraulic systems from pressure surges
• Act as bypass or prefill valves
• May work as pre-tensioning valves

The available hydraulic valves are available in a range of designs and shapes. In most cases, these valves are spring-loaded with either a plate or a ball that prevents flow in the opposite direction.

One good thing about these valves is that they can isolate a hydraulic system without any leakages.

These are examples of check valves. Image source: Aeronautics Guide

These hydraulics check valves come in a wide range of shapes and designs. Also, they are made from different materials such as stainless steel, zinc plated carbon, etc.

Depending on the type of application at hand, you may choose:

• Hydraulic check valves with hardened seat
• Line rapture valve
• Shuttle valves that only allow for hydraulic fluid flow at high operating pressure

Apart from these three, there is another special type of check valve that is common in many applications. This is the pilot operated check valve.

5.3.4 Pilot-Operated Check Valves

A pilot operated check valve is a special type of valve that allows for fluid flow in two directions. Below is a standard symbol you can use to represent this valve in a hydraulic circuit.

This is a symbol of a pilot operated check valve. Image source: Hydraulic Valve

Normally, during the first phase, this valve allows fluid to flow in one direction like any other hydraulic check valve. However, in the reverse direction, a pilot pressure line will hold the valve open to allow for free fluid flow.

5.3.5 Pilot Logic Elements

Pilot logic elements are multi-purpose devices that perform a wide range of functions such as controlling pressure, direction and flow. Normally, these elements are used in cartridge valves to create a complex and functional hydraulic circuit.

Basically, these are cartridge valves you can conveniently install in hydraulic manifold blocks. With proper selection of pilot logic elements you can create a complex hydraulic circuit with optimal performance even at low pressure drop and high flow rates.

The pilot logic elements come in complex designs that may perform a range of functions such as:

• Sensing presence of load
• Bypass pressure in compensated pressure control
• Optimizing flow in areas of low pressure drop
• Designing energy efficient manifold blocks

This is a circuit diagram of a cartridge solenoid valve symbol.

There is a wide range of pilot logic elements you can incorporate in a hydraulic circuit to achieve unique performance requirements.

5.3.6 Lock Valves

Lock valves are available in a wide range of designs to lock hydraulic cylinders and sections of the circuit from possible damage and leakage. You can use lock valves whenever the directional control valve is in neutral position.

Some of the key functions of hydraulic lock valves include:

• Prevent load drop and drift
• Locks actuator and help relieve excess pressure
• Act an emergency manual release
• Prevent actuator cavitation and chatter

This is a complex circuit showing a hydraulic system with a manual lock system. Image source: Integrated Publishing

Again, hydraulic lock valves are available in a wide range of shapes and designs. You should choose one that fit your hydraulic system.

5.3.7 Hydraulic Servo Valve

A hydraulic servo valve is a device that monitors the flow of hydraulic oil in response to a specific command (electrical input signal) to control force, position, velocity or pressure in a system. You can classify these valves as closed-loop control devices and they can be single, two or three stages.

To achieve a precise control mechanism, the hydraulic servo valve uses a feedback control mechanism.

Above is an example of a two-stage servo valve. Image source: Hydraulic Valve

Normally, you can modify these systems to suit the desired application depending on the nature of the control system.

In summary, there are many types of hydraulic valves for a range of applications. Depending on the task at hand, you may choose either standard or custom hydraulic valves.

With all these in mind, now let&#;s discuss the various parts of hydraulic valve parts. This will give you an in-depth understanding of hydraulic valve design, hence, a high chance of choosing the right accessory.