Difference between lucite and plastic?

Celluloid Celluloid is one of the earliest man made plastics that was widely used in making plastic jewelry. Jewelry made of celluloid dates roughly from -. Celluloid has certain characteristics which differentiate it from other plastics. In general, pieces made from celluloid tend to be thin, light, somewhat brittle, sensitive to heat (they crack and craze), and early celluloid can be extremely flammable (do not ever test with a hot pin!). Celluloid is flexible. It can be bent, twisted, and molded. When placed briefly in hot water, early celluloid smells like camphor, while later cellulose acetate smells like vinegar. Celluloid jewelry should be stored carefully. Extremes of temperature, moisture, exposure to cosmetics or perfume, or lack of adequate ventilation can cause a celluloid piece to become "sick" and begin to discolor, crack, or even disintegrate. A "sick" piece is contagious, and should be placed in quarantine away from other pieces. Bakelite Bakelite was developed by Dr. Leo H. Baekeland, and it was patented in . It was the first thermosetting phenol formaldehyde resin. Other companies produced similar phenolics, calling their products Catalin, Prystal, Marblette, and Durez, but since it is almost impossible to identify pieces by their manufacturers, phenolics in general are commonly referred to as Bakelite. A very wide range of items were produced from Bakelite, including billiard balls, telephones, radios, kitchen utensils, poker chips, and of course, jewelry. Bakelite's unique characteristic is that once it has been heated and formed, it can not be melted down and re-formed. It can be cast, laminated, inlaid, carved, and tinted almost any color of the rainbow. Bakelite colors, however, do change with age. Most pieces which collectors identify as Apple juice yellow were originally colorless, and white Bakelite mellows to a creamy ivory color. Bakelite can be transparent, translucent, or opaque. Bakelite tends to be heavy. When two pieces are tapped together they make a distinctive deep "clack", as opposed to the high pitched "click" of later plastics. Bakelite pieces develop a surface patina over time. Their surface color tends to darken, and very fine pits and scratches are produced with wear. A nice patina enhances the value of a piece. When placed briefly in hot water, most but not all Bakelite has a unique unforgettable carbolic acid smell. Bakelite should be stored carefully, although it is not as fragile as celluloid. Lucite Lucite, an acrylic resin, was first marketed by DuPont in . Lucite began to appear in costume jewelry around . Like Bakelite, it is a thermoset plastic, but it was much cheaper to produce. Lucite could be molded, cast, laminated, inlaid, and carved. Although in its original state it is clear and colorless, it could be tinted any color of the rainbow, from transparent to opaque. Lucite continues to be used in jewelry manufacture, but it reached its height of popularity in the s-s. Common post-war pieces of interest to collectors include clear Lucite imbedded with glitter, seashells, rhinestones, or flowers. When placed briefly in hot water, Lucite is odorless. Older Lucite can develop cracks from age or exposure to heat. HOT WATER Provided that the piece does not incorporate string, wood, hand painted decoration, or other non-plastic decorative materials; hold the edge of the piece under HOT running tap water for up to 30 seconds and then smell it. Bakelite has a characteristic Phenol or fresh shellac odor. No odor probably means that the piece is Lucite. RESTORING STRIPPED BAKELITE Unfortunately, many pieces of Bakelite are showing up with their finish stripped by over enthusiasatic chemical testing. These pieces are dull and unattractive , and need to be restored. The best product to use to restore these pieces is Simichrome Polish. I have also had good results with Turtle Wax Clear Coat. Simichrome produces a hard shiny finish, whereas the Turtle Wax finish is less brilliant. It may take several applications and polishings with the product of your choice to restore a stripped finish. (hint: use a swab to work on that nasty cloudy residue that is present in carved areas on stripped pieces.)

Click here to get more.

Link to KDSX

The company is the world’s best Wholesale Acrylic Furniture supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.