5 Why & 5 How | Root Cause Analysis

How to Perform 5 Why & 5 How

1. Form the Team

The 5 Why & 5 How exercise should be performed by a Cross Functional Team (CFT). It should not be done alone at your desk. The team should include representatives familiar with the process in question along with members from Quality, Process Engineering and operators from different shifts or from the next step in the process. Each team member will bring their own unique viewpoint of the problem and ask important questions that may not otherwise have been asked.

The company is the world’s best oil seals & packages supplier supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

2. Define the Problem

The first thing any team should do during a root cause investigation is to clearly define the problem. Develop a clear and concise problem statement. The team should keep their focus on the process and not on the personnel. The team should also determine the scope of the problem to be addressed. If the scope is too narrow the problem solving exercise could result in small improvements when larger, broader improvements are needed. Adversely, defining the problem with too broad of a scope could extend the time required to resolve a problem and generate solutions that might not fit the corporate culture or align with corporate strategy and never be carried out. When you take the time to clearly define the problem up front, it often saves time and makes solving the problem easier.

3. Ask Why

Next the team leader or facilitator should ask “Why” the problem or failure mode occurred. The responses must be backed by facts or data and not based on an emotional response. The responses should also focus on process or systems errors.

The facilitator should then ask the team if the identified causes were corrected, could the failure mode or problem still occur. If the answer is yes, then move on to the second “Why” and then the third, fourth, fifth and so on until the answer is no.

Note: It is not always necessary to ask “Why” five times. The root cause could be identified during the third or fourth “Why”. It may also take more than five times to get through the symptoms of the problem and down to the root cause. In addition, by the 3rd, 4th, or 5th “Why”, you may likely discover a systemic or management practice as the cause.

4. Determine and Implement Corrective Actions

Upon determination of the root cause(s), a list of appropriate corrective actions should be developed to address each root cause. 5 How is a useful method of brainstorming resolutions to the root causes and developing action items to resolve the problem. The facilitator should ask the 5 Hows related to the issue at hand. How can this cause be prevented or detected? Keep asking “How” until you get to the root solution that resolves the root cause. The actions should have an owner and a due date. Regular meetings should be held to update the team on the status of the actions until all are completed. Upon completion of the recommended actions, the effectiveness of the actions should be determined. The process could be monitored and measured using Statistical Process Control (SPC), Part inspection or other methods to validate effectiveness of any improvements.

Basic 5 Why Example

There are various formats used to document the 5 Why exercise, some more detailed than others. The following is an example of the basic 5 why process.

Problem statement – An operator fell and was injured during the first shift start up.

1. Why? There was an oil spill on the floor in the machining department.
2. Why? A Seal in machine 3 deteriorated and began cracking and leaked oil.
3. Why? The seal material was not robust to the application.
4. Why? Lower cost seals purchased from new supplier.
5. Why? Seal material not specified in service manuals.

Caution must be observed to assure that the “Whys” follow a logical path. One method to check if the progression follows a logical path is to read the causes in reverse order. When you read the causes or “Whys” in reverse order, they should follow a logical progression to the problem statement or failure mode. Referencing the example above, the progression would be like this:

• The seal material specifications are not listed in the service manual
• Therefore – Lower priced seals were purchased from a new supplier to reduce costs
• Therefore – The seal material was not robust enough to the application
• Therefore – A seal in machine 3 deteriorated, cracked and began leaking
• Therefore – There was an oil spill on the floor
• Therefore – An operator slipped and fell and was injured on first shift

The Three Legged 5 Why

It is not uncommon that the problem may have more than one contributing root cause. The 5 Why progression will sometimes branch out to form more than one path. In many cases, the root cause occurs due to an ineffective detection control or systemic issue within the organization. The Three Legged 5 Why includes additional paths to determine what control or process was not in place or not effective enough to detect the failure prior to the incident. Systemic or management processes either not in place or that could have contributed to the incident are also reviewed.

The 5 Why / 5 How method is one of several Root Cause Analysis (RCA) tools available for use in problem solving and continuous improvement activities.  If you would like additional information about the 5 Why / 5 How method or other RCA tools, please contact one of our highly trained and experienced professionals at Quality-One. Your success is our business!

Shaft seals, dirt seals, grease seals, lip seals, and many other names are only a few of the many names given to oil seals. They are simple components used in rotary shaft machinery to keep oil from leaking and impurities like dust, dirt, and water out. However, an oil seal’s most crucial role is to safeguard all ball, sleeve, and roller bearing types found in rotating shafts. Additionally, the seals stop blending two fluids that shouldn’t mix, such as water and oil.

What are oil seals?

A mechanical tool called an oil seal keeps lubricant from leaking out of the machine. It accomplishes its goal by sealing the equipment’s moving and stationary parts. Additionally, it prevents impurities from getting inside the machine and shortens its lifespan, an important role it completes.

Numerous oil seals exist, including PTFE lip oil seals, rubber fabric oil seals, and rotating V-seals.

An oil seal kit is a set of oil seals with the necessary dimensions and desired characteristics. An oil seal kit is more cost-effective and advantageous than buying individual oil seals.

Types of oil seal NBC offer 

Oil or other seals can be used for grease and oil seals. A flexible lip, radial lip, or rotating shaft seal are different names for an oil seal. Single lip, double lip, triple lip, and four or more lips are frequent configurations.

Due to eliminating the fluid lip using poly inserts and rotors, the Efficiency Plus (EP) seal has a reduced torque value of fewer than 15 in-lbs. Although it features a triple dust lip rather than a double dust lip, the dust lip is still a molded component of the design. A labyrinth-like insert and rotor interlock each other to replace the fluid lip. NBC Brenco labyrinth provides excellent grease while lowering the torque required to rotate the seal.

• Single lip oil seal

• Metal cased

  For more information, please visit o ring seal supplier.

  Additional reading:
  What are the characteristics of a volute spring?
  Are brother and JUKI the same?
  Wave Spring: Sizing and Selection
• 
  Key Considerations When Buying Samsung Vme Ill Boards
  Who is the largest fastener company in the world?
  50CrV4 Spring Steel Bar
  What Is a Yamaha Vacuum Solenoid Valve?

  All rubber or polymers

• Internal orientation

• External orientation

• Axial orientation

• Spring-energized

• To serve as a physical barrier that keeps the lubricant in the designated area.

• To stop the lubricating oil from leaking outside despite high oil pressure.

• Act as a barrier to keep debris, contaminants, and other outside elements out of the system containing the lubricating oil.

Why is bearing a seal important?

Why are sealed bearings favored over the unsealed alternative? Why ought sealed ball bearings be preferred to unsealed ones? What advantages can sealed ball bearings offer?

• Worry-free lubrication

• No contact

• Self-contained

What are bearing isolators?

Dynamic seals called bearing isolators are used to shield bearings from external impurities. They are revolving (rotor) and stationary (stator) elements. O-rings or strong seals are used in some bearing isolators, while they are constructed like labyrinths in others.

Different types of bearing seals

For many bearings, a good bearing seal is essential. Bearing seals perform a dual function by keeping lubricants from leaking out while preventing impurities from entering your parts. Both procedures can help your bearings last longer, but choosing the proper seals for your components is critical. Different types of bearing seals include:

• Contact seals

• No-contact seals

• Labyrinth seals

Pick the proper seal for your bearing with the NBC bearing

.

Several variables, including maximum temperatures, required lubricants, available space, and more, may influence your choice of bearing seal. Each factor can affect the type of bearing best for your application, the amount of material required, and other factors.

Although the choice of seals is crucial to the effectiveness of your bearings, you don’t have to make that choice alone. Our experts at NBC bearings can collaborate with you to identify the bearings and bearing seals that provide the best, most affordable solution for your application, environment, and finished product.

Want more information on oil seals manufacturers? Feel free to contact us.