When searching for and qualifying a new metal supplier, here are our responses to four of the most common questions.
Check now
What Are Your Minimum Order Requirements?
In order to provide a minimum order quantity (MOQ) to suit metal product orders of all sizes, Mead Metals has developed an In order to provide a minimum order quantity (MOQ) to suit metal product orders of all sizes, Mead Metals has developed an MOQ policy . Every metal product we provide has its own MOQ, which can be found on each of our individual product pages . For example, the MOQ for Annealed Spring Steel is 30-60 lbs.
While we can and will support orders for quantities smaller than this, the minimum lot charge will remain the same for any quantities ordered at or below a metal&#;s MOQ. Additional variables do apply depending on material thickness, width, and additional processing.
Can I Get Certs with My Order?
If your material requires compliance to a standard like DFARS, AMS, or ASTM, the most important thing you can do is let us know at the time of quote. When that need is identified upfront, we&#;re able to quickly find out whether or not we can meet that requirement.
Advanced notice of any specific material requirements would be recommended at the time of quote as well. For example, if your material requires Mill Traceability, that&#;s something you'll want to let us know upfront because we&#;re going to be able to let you know fairly quickly whether or not we can meet your request.
What&#;s Your Lead Time?
This question comes in all shapes and sizes:
- How fast can you get this out?
- How fast can you ship it?
- Can I get it tomorrow?
- Can I pick it up today?
As metal suppliers, we&#;re all too familiar with the urgency that some project timelines are under. During the ordering process, we always quote the material type and all the specs. Then, we give the lead time for the shipment. The majority of our customers want their metal material ASAP, and we do our best to accommodate them. In fact, our lead times are always industry-competitive and usually faster than our competitors. We have pretty quick turnarounds for many of our items.
With our regular customers, we&#;re known as a supplier that&#;s able to deliver what they&#;re looking for in the window they need. Because of this, we&#;re often a go-to supplier in situations where they need a quick turnaround for high-quality metal material.
Can You Send Me a Line Card?
Before the Internet got so big, it was common for metal suppliers to have line cards that detailed their common stock items. It was an easy way for customers to find out what else a certain supplier carried. Nowadays, we&#;ve made line card information available right here on our website. Better yet, we put together print-friendly versions of line card information for customers who prefer to work with a physical copy instead of staring at a screen.
We may be calling them whitepapers now, but you can think of them as line cards you can grab right off of our website. And, since they&#;re set up for printing, the charts and tables outlining material specs won&#;t get messed up if you decide to print them.
Working with a new supplier can be stressful, but the process can be a little less scary by asking the right questions. Also, if you're new to the industry, I invite you to download our Complete Guide to Buying Metal Products as an additional resource to keep in your back pocket.
Are you ready to launch your metal project? Are you trying to find the perfect manufacturing partner to get the job done? Below are five important questions you should ask any prospective metal supplier. The benefit of working with a qualified, experienced contract manufacturer is that they have a wealth of knowledge to ensure your product is best produced. Guess what? They probably know more than you do. And that's the whole point.
1. Do you have the capabilities to make my components?
If you are looking for more details, kindly visit Youngson.
It's possible that your manufacturer will have to subcontract some processes or highly technical inspections. Ask about this up front so you know exactly what's happening, where it's happening, and who is monitoring each step. Other questions that are important when it comes to inspecting components with tight tolerances include:
- What types of equipment does your facility have?
- What are the limitations of this equipment?
- How does this affect quality inspection?
- How much of the inspection process is manual vs. automated?
2. Which material is best for my project?
This may seem like a silly question to ask, because chances are you decided long ago which material would be used for this part. But here's an important thing to remember: different supply chains do things, well, differently. This is especially the case for offshore operations. Raw material and technical specs vary from country to country, meaning your carbon steel may become a Q235 steel in China (unbeknownst to you). While most metals can be closely matched, there's a chance that chemical properties may differ slightly.
Before talking with your prospective partner, review international metal equivalents and plan to adapt to your new supply chain, rather than forcing your material requirements into a mold that's shaped differently! Find a manufacturer with strategic sourcing expertise and you should have no problem meeting your original spec.
3. Which manufacturing process is best for my project?
Your supplier will ask about the project's scope &#; essentially meaning, how many do you need produced? Scope will play a key role in determining which manufacturing process is best, whether that means machining, sandcasting, diecasting, forging or otherwise. Subprocesses such as finishings, treatments, plating, painting, polishing or sandblasting can either be done in-house at your primary supplier or can be subcontracted. It's important to know where each process will be executed, as any risks associated with involvement of a third party should be recognized and assessed early on.
4. Can you meet these regulatory compliances?
As you likely know already, metal parts are rife with regulatory concerns, from product safety to material compliance. Partnering with a seasoned supplier who understands applicable compliances is the only way to go. This is an area where you don't want to cut corners, as you could quickly find yourself in not just hot, but boiling water. The moment your so-called-qualified supplier unknowingly sources tin from the Congo (in violation of the Dodd-Frank Act / Conflict Minerals Policy / 3TG) is the exact moment you cannonball into that scalding hot spring.
An example: A supplier can claim to make your product RoHS-compliant, but without proper knowledge of the intricacies of this regulation, you could find yourself in an unfavorable position. Let's take zinc-plated (galvanized) steel, for instance. Per RoHS, a trivalent chromate conversion coating is compliant, while a hexavalent chromate is toxic and, thus, non-compliant. Simply proving that the raw materials are acceptable is not sufficient in this case since the process (rather than the raw materials themselves) can send you into non-compliant territory. Therefore, parts must be tested post-production to ensure compliance. This level of knowledge and attention to detail is what you should be seeking out in your metal supplier.
5. Can I schedule a visit?
Do everything in your power to learn as much as possible about your supplier, from company history to product array to financials. If you're considering going offshore, finding a competent, trustworthy contract manufacturer is all the more crucial. If sub-suppliers will be involved, get familiar with them as well. Forging deep relationships is the best approach. Ask about planning a visit and touring the facilities. Establish a clear communication path to the support you'll need &#; this should include direct access to management, as well as technical support.
Of course, there are other questions you should ask before jumping into production, but these five will ensure you're dealing with a metal supplier that can handle the complexity of your project and understands the wider scope of a sophisticated, global supply chain.
5 Best Metals Made in India
"What Kind of Metal Do You Guys Manufacture?"
Get Free Articles by
Are you interested in learning more about Brass Plating Steel Strip manufacturer? Contact us today to secure an expert consultation!
Comments
0